The filter is a core small part of the vertical disc injection molding machine. Regardless of the small filter, it is actually a very important component, because the filter is related to the service life of the vertical disc injection molding machine. The filter protects the normal operation of circulating fluid, valves, oil pumps, and hydraulic components. Because of the importance of filters, we should ensure that the filters are working properly. So how to judge whether the disc injection molding machine needs to replace the filter? This is an important issue, so Jinmao shares how to judge whether the disc injection molding machine needs to replace the filter:
There is a pressure indicator light on the filter. If the indicator light sounds an alarm, you need to replace the filter at this time. If the filter is not replaced in time, the performance of the valve, oil pump, and hydraulic components will decrease or be damaged. When we remove the old filter, we can see that it is full of impurity particles to verify again whether the filter needs to be replaced. If the inside is clean! Then you need to check whether other components are normal at this time.
